- Trailer Hubs
- 1-3/8” x 1-1/16" Trailer Hub – 5 Lug on 4.5” Galvanized Assembly (L68149 / L44649)
1-3/8” x 1-1/16" Trailer Hub – 5 Lug on 4.5” Galvanized Assembly (L68149 / L44649)
- In Stock
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 10 - 20||and get $8.50 off|
Champion's Hot Dipped Galvanized Trailer Hub is perfect for boat trailers in saltwater environments.
This 5 lug galvanized trailer idler hub fits on a 1-3/8” x 1-1/16" trailer spindle and can be used on axles with 3,000-3,500 pound capacities. This trailer hub is the most commonly used hub in the trailer industry today. Do not forget to always double check your current trailer hub to match up the proper trailer bearings.
Each 5 Lug Galvanized Trailer Hub includes the inner and outer trailer bearings, double lip seal, and dust caps. All trailer hubs have the appropriate trailer race already installed for easier installation of your trailer hub. For added convenience we have included two different double lip seals to ensure that you have everything needed to replace your hub on your trailer spindle just make sure to test out which seal is the proper one. Most EZ Loader Trailers will use the 168255TB double lip seal.
Take a look at Champion Trailers Hub Packing and Pre-Loading Procedure for proper and safe trailer hub installation.
Trailer Hub Specifications:
Inner Trailer Bearing Number: L68149 (1-3/8” ID)
Outer Trailer Bearing Number: L44649 (1-1/16” ID)
Inner Trailer Race Number: L68111
Outer Trailer Race Number: L44610
Bolt Pattern: 5 lug on 4.5”
Hub Bore ID: 1.98”
Hub Height: 4.25”
Trailer Hub Kit Includes:
1-5 Lug Galvanized Idler Hub
1- L68149 Trailer Bearing
1- L44649 Trailer Bearing
1-L68111 Trailer Race
1-L44610 Trailer Race
1-17255TB Double Lip Seal
1-168255TB Double Lip Seal
1-1.98 Plain Metal Dust Cap
1-Black Iron Cotter Pin
5- ½-20” Zinc Lug Nuts
Tie Down Engineering
Customers Also Viewed