Bunk Brackets, Boards, & Hardware

12 inch Wide Bunk Board Carpet, Marine Grade Rubber Backed in Black

12'' Wide Black Rubber Backed Marine Grade Carpet (Per Ft)

9 inch Wide Bunk Board Carpet, Marine Grade Rubber Backed in Black

9'' Wide Black Rubber Backed Marine Grade Carpet (Per Ft)

18 inch Wide Bunk Board Carpet, Marine Grade Rubber Backed in Black

18'' Wide Black Rubber Backed Marine Grade Carpet (Per Ft)

Stainless Steel Hex Head Lag Screw 3/8" x 1.25"

Stainless Steel Hex Head Lag Screw 3/8" x 1.25" This lag screw is best used when attaching 2x6 bunk boards to the swivel bracket.  These lag screws are made out of 304 stainless steel are are 1.25" in length which will not go through the trailer...

24 inch Wide Bunk Board Carpet, Marine Grade Rubber Backed in Black

24'' Wide Black Rubber Backed Marine Grade Carpet (Per Ft)

Angle Swivel Top Clip 1/2'' Hole

Galvanized Angle Top Swivel Clip Champion's galvanized angle clip mounts to the standard bolster or swivel brackets.  Each angle clip is designed to be used with 2x4 of 2x6 boards.  Mounting Hole Diamter: 1/2" Top Mounting Hole Measurement:...

1/4" X 1 1/4" Stainless Steel Lag Screw (Sold Ea)

1/4" X 1 1/4" Stainless Steel Lag Screw (Sold Ea)

8" Swivel Top Bolster Bunk Bracket Assembly - Galvanized

8" Swivel Top Bolster Bunk Bracket Assembly This galvanized swivel bolster style bracket assembly will accept 2x4 or 2x6 boards for boat trailer bunks.  Each kit includes the vertical bracket, swivel bracket, and the 1/2 inch bolt with lock nut...

10" Swivel Top Bunk Bracket Assembly - Galvanized

10" Swivel Top Bolster Bunk Bracket Assembly This galvanized swivel bolster style bracket assembly will accept 2x4 or 2x6 boards for boat trailer bunks.  Each kit includes the vertical bracket, swivel bracket, and the 1/2 inch bolt with lock nut...

3/8 X 2" Stainless Steel Lag Screw (Sold Ea)

3/8 X 2" Stainless Steel Lag Screw (Sold Ea)

12" Swivel Top Bolster Bunk Bracket Assembly - Galvanized

12" Swivel Top Bolster Bunk Bracket Assembly This galvanized swivel bolster style bracket assembly will accept 2x4 or 2x6 boards for boat trailer bunks.  Each kit includes the vertical bracket, swivel bracket, and the 1/2 inch bolt with lock nut...

3/8 X 3" Stainless Steel Lag Screw (Sold Ea)

3/8 X 3" Stainless Steel Lag Screw (Sold Ea)

EZ LOADER Top Bracket For Bunk Boards #250-022387-10

EZ LOADER Top Bracket For Bunk Boards (Attaches To P#21786g) The EZ LOADER Top Bracket attaches to the EZ Loader Bunk Support Bracket (21786G)  Each top bracket will use four 3/8" x 1-1/4" stainless steel lag screws to attach the board to the...

EZ LOADER 30" Channel Top Bunk Board Support Bracket #250-022047-10

EZ LOADER Channel Top Bunk Board Support Bracket 30" Long The EZ LOADER Top Bunk Support Bracket is hot dipped galvanized for maximum corrosion resistance.  The overall length of the EZ LOADER bracket is 30" and is typically used on the rear cross...

12" Vertical Bunk Bracket

10" (Loa 12") Vertical Bunk Bracket

10" Vertical Bunk Bracket

10" Bunk Brackets for Vertical Mount Boards 

8" Vertical Bunk Bracket

8" Bunk Brackets for Vertical Mount Boards

8" Bolster Swivel Bracket 1/2 inch Hole

8" Swivel Top Bracket Only This 8" swivel or bolster bracket is designed for 2x4 or 2x6 bunk boards.  Buy the Angle Top Clips separate or purchase as a complete kit.  Champion Trailers's bolster brackets are made out of 11 ga galvanized...

12" Bolster Swivel Bracket 1/2 inch Hole

12" Swivel Top Bracket Only 1/2" Hole

10" Bolster Swivel Bracket 1/2 inch Hole

10" Swivel Top Bracket Only 1/2" Hole

MAGIC TILT Galvanized Pontoon Bunk Bracket with Yolk #PT2025

MAGIC TILT Galvanized Pontoon Bunk Bracket with Yolk #PT2025 Replacement MAGIC TILT OEM bunk board bracket for pontoons.   Length:  14" Width: 3" Fits over 2" tubing. Yolk has an opening of 2-1/8"