Trailer Seal 168255 - 1.68 ID x 2.56 OD

Calculated at Checkout
Frequently bought together:


Trailer Wheel Seal 168255

The 168255  grease seal can be used on the 1-3/8 x 1-1/16" spindles with smaller seal seats or on most EZ Loader trailers.  Each trailer grease seal is made of the standard metal body with the double lip rubber seal.  Colors of the metal body may come in blue, green, or beige.

Seal Inside Diameter:  1.68"

Seal Outside Diameter: 2.56"

Typically used with inner bearings 68149

Transcom Number 168255

National Number 470460

NOK Number UD0135E


Trailer wheel seals are an integral part of a well operating trailer hub.  Trailer seals are installed in the back of the hub and seal to the section of the spindle that works to keep the wheel bearing grease or oil in a trailer hub, prevents water and dirt from entering the hubs which could cause bearing failure.  Therefore, it is extremely important to inspect your trailer seals regularly.  Grease or oil leaking past the seal seat or grease on the back of your trailer rim is a sign of a worn, torn, or old seal and must be fixed to prevent damage to the trailer hub or the trailer axle.

View AllClose