Trailer Seal 15192 - 1.50 ID x 1.98 OD

Calculated at Checkout


Trailer Wheel Seal 15192

The 15192 grease seal is usually found on the 1-1/16" spindle, however, it is not as common as the 125192 seal.   This trailer grease seal is made of a metal body with double lip for sealing to the spindle.  Color varies

Seal Inside Diameter:  1.50"

Seal Outside Diameter: 1.98"

Typically used with inner bearings 44649


Seal Number Cross Reference

Transcom Number 15192

NOK Number AD2267E


Trailer wheel seals are an integral part of a well operating trailer hub.  Trailer seals are installed in the back of the hub and seal to the section of the spindle that works to keep the wheel bearing grease or oil in a trailer hub, prevents water and dirt from entering the hubs which could cause bearing failure.  Therefore, it is extremely important to inspect your trailer seals regularly.  Grease or oil leaking past the seal seat or grease on the back of your trailer rim is a sign of a worn, torn, or old seal and must be fixed to prevent damage to the trailer hub or the trailer axle.


Double Lip Seal Diagram

View AllClose