Product DescriptionTitan Dico Model 60 Hydraulic Disc Brake Coupler
- Zinc Plated
- 2'' Coupler Ball fitting with Lever Latch
- Fits over a 3'' wide tongue
- Mounting holes measure 3'' center to center
- Master cylinder has been drilled and tapped to install a bleed solenoid
- Titan Dico Model 60 Owner's Manual
The MODEL 60 actuator is intended for light occasional use on recreational, marine,
and baggage trailers, which are towed by passenger cars or pickups. The actual inservice
rating is limited to that of the ball and hitch being used or the trailer
manufacturer's G.V.W.R. shown on the certification label, whichever is lower.
6,000 POUNDS MAXIMUM GROSS LOAD (weight of trailer fully loaded with all cargo and equipment). To find yourtrailer's Gross Load, use a commercial vehicle scale at a truck weigh station, grain elevator, etc.
600 POUNDS MAXIMUM TONGUE LOAD (weight applied downwards by the fully loaded trailer's coupler onto the towvehicle's hitch). Measure your trailer's Tongue Load with the tongue in the horizontal towing position, using either a
commercial scale or a bathroom scale if the load is small enough. Upwards tongue loads are not permissible.