Product DescriptionTitan Dico Model 6 Hydraulic Disc Brake Coupler
- Zinc Plated
- 2 5 /16 '' Coupler Ball fitting with Lever Latch
- Fits over a 3'' wide tongue
- Mounting holes measure 3'' center to center
- Master cylinder has been drilled and tapped to accept a bleed solenoid
- Titan Dico Model 6 Owner's Manual
The Model 6 actuator is intended for use with recreational trailers subject to more
frequent use, light utility trailers, and light occasional-use industrial trailers, which
are towed by passenger cars and pickups. The actual in-service rating is limited
to that of the ball and hitch being used or the trailer manufacturer's G.V.W.R.
shown on the certification label, whichever is lower.
8,000 POUNDS MAXIMUM GROSS LOAD with 2 5/16" bolt-on coupler
800 POUND MAXIMUM TONGUE LOAD with 2 5/16" bolt-on coupler. This is the weight applied downward by the fully loaded trailer's coupler on the tow vehicle'shitch. Measure your trailer's Tongue Load with the tongue in a horizontal towing position, using a commercial scale. Upward tongue loads are not permissible.