Titan Dico Model 10 For Disc [For use with Blocking Solenoid]

Calculated at Checkout


Titan Dico Model 10 Hydraulic Disc Brake Coupler

  • Zinc Plated
  • 2 5 /16 '' Coupler Ball fitting with Lever Latch
  • Fits over a 3'' wide tongue
  • Mounting holes measure 3'' center to center
  • Set up to accept a blocking solenoid
  • Titan Dico Model 10 Owner's Manual


The Model 10 actuator is intended for use on heavier recreational and light industrial
trailers. The actual in-service rating is limited to that of the ball and hitch being used
or the trailer manufacturer's G.V.W.R. shown on the certification label, which ever is

10,000 POUNDS MAXIMUM GROSS LOAD (weight of the trailer fully loaded with all cargo and equipment). To find yourtrailer's Gross Load, use a commercial vehicle scale at a truck weigh station, grain elevator, etc.

800 POUNDS MAXIMUM TONGUE LOAD (weight applied downward by the fully loaded trailer's coupler onto the tow vehicle's hitch). Your trailer's tongue load may be checked using a commercial scale. Make sure the tongue is in horizontal position and the jack is the only component on the scale. Upward tongue loads are not permissible.



View AllClose