Tie Down Dexter Marine 660 Disc Brake Coupler with Solenoid #70460

Calculated at Checkout
Frequently bought together:


Tie Down Engineering Model 660 Disc Brake Coupler with Solenoid by Dexter Marine #70460


Pre-charges Dampener Unit

 No longer will you be required to "pump" the dampener first before bleeding the brakes.  All Tie Down actuators now have a pre-loaded dampener.

Drop N Go Auto Latch

The 2" coupler in the closed (tow) latch position will auto latch onto the hitch ball when set on top of the hitch ball, with minimal weight. Incorrect latch and/or forgetting to proper close the latch mechanism is the number one reason for trailer separation from the tow vehicle.

Larger Fill Cap On Master Cylinder

Easy to remove and easier to add brake fluid as needed.

Enclosed Aluminum Master Cylinder 

Corrosion resistant and larger capacity master cylinder requires less refilling

Solenoid Access

Solenoid plumbing is built into the master cylinder.  This unique feature eliminates removal of entire solenoid for servicing, removal of brake hose, and removal of whole actuator or housing for servicing. 

PVC coated and corrosion resistant coiled E-stop Cable 

Cast steel latch handle for stronger and better looking latch

Stainless steel safety pin

Cast steel ball clamp that is stronger than stamped steel

Standard hole pattern for industry standard position


View AllClose