KODIAK 10" Disc Brakes
- Calculated at Checkout
KODIAK 5lug on 4.5 10" Integral Hub Rotor Dacromet Disc Brake Unit - 2/HRCM-10-DAC-KIt (without bearings)
The KODIAK Dacromet plated rotor, caliper, and adapter plate offers the best protection for salt water without the price of stainless steel. In a standard salt spray test, rust began forming on the KODIAK Dacromet brakes between 400-500 hours. The Integral disc brake unit is cast as a single unit which means the hub and the rotor are a solid piece and offers a smoother ride. The 10" KODIAK integral hub/rotor fits inside 13" or larger wheels and mounts to the standard 4 hole flange found on most 3,500 lb trailer axles. The Dacromet caliper includes stainless steel slider pins as well as ceramic pads. Each KODIAK kit will complete two wheels.
Manufacture Part Number: 2/HRCM-10-DAC
2 - Rotor/Hub-10-DAC (Dacromet Coated)
2 - DBC-225-DAC (Dacromet Coated Calipers – Loaded)
2 - CMB-10-U-DAC (Dacromet Coated Brackets)
Rotor Diameter: 10"
Rotor Style: Vented - Integral
Bolt Circle: 5 studs on 4.5"
Axle Size: 3,500 lbs
- Fits Spindle Size: 1-/8" x 1-1/16
*The KODIAK 10" integral brakes generally replace most 10" hydraulic drum brakes*
Champion always recommends to use a high temperature marine grease when installing the KODIAK brakes