Trailer Hitches

1/4" x 48" Zinc Plated Safety Chains with S Hooks

3/8" Galvanized Screw Pin Shackle

5/16 X 52" Zinc Safety Chain With S-Hooks

Weigh Safe 6" Drop Hitch with 2" Shaft with 2" and 2-5/16" Stainless Steel Hitch Ball  #WS6-2 Weigh Safe is the only hitch in existence with a built-in scale to measure tongue weight. Why is knowing tongue weight so important? Too much can affect...

5/16" Galvanized Screw Pin Shackle

WEIGH SAFE 180 Hitch with 6" drop and 2" hitch - #LTB6-2 When drivers turn their tow-ball around in the stowed position, they are therefore not in a towing state of mind and potentially less cautious driving over bumps and dips. In this situation, often...

2x2" Receiver Hitch Pin with Safety Clip

BulletProof Anti-Friction Grease, a perfect complement to the BulletProof Hitch™. Applying a thin layer to each ball will help eliminate friction and will help prevent corrosion to the dual ball. The anti-friction grease can also...

Safety Clip For Hitch Pin (Clip Only)

WEIGH SAFE 180 Hitch with 4" drop and 2" hitch - #LTB4-2 When drivers turn their tow-ball around in the stowed position, they are therefore not in a towing state of mind and potentially less cautious driving over bumps and dips. In this situation, often...

Weigh Safe 4" Drop Hitch with 2" Shaft with 2" and 2-5/16" Stainless Steel Hitch Ball #WS4-2   The Weigh Safe Drop Hitch is the one and only trailer hitch with a built-in scale that signals you to adjust your load before you hit the road,...

Weigh Safe 6" Drop Hitch with 2.5" Shaft with 2" and 2-5/16" Stainless Steel Hitch Ball  #WS6-2.5 Weigh Safe is the only hitch in existence with a built-in scale to measure tongue weight. Why is knowing tongue weight so important? Too much can...

Weight Distribution/Sway Control Adapter for BulletProof Hitches This solid steel adapter allows you to attach a weight distribution/sway control head to a BulletProof Hitch. After modifying your vehicles suspension and adding larger tires, you may need...

1-7/8" Single Ball

BulletProof Hitches™ are manufactured to a very tight tolerance of +/- .010 of an inch. Unfortunately, hitch receivers cannot always live up to these standards. Tolerances can vary as much as .100 of an inch and could cause some...

2" & 2 5/16" Heavy/Extreme Duty BulletProof Dual Ball

2" & 2 5/16" Medium Duty BulletProof Dual Ball

2" Trailer Hitch Receiver Ball This coupler ball is made out of chrome plated steel and V compliant.  Each coupler ball includes the washer and nut for attaching to the bumper or your trailer hitch bar.   Ball Diameter: 2" Shaft 1" x 1-1/8"

2-5/16" Trailer Hitch Receiver Ball This coupler ball is made out of chrome plated steel and V compliant.  Each coupler ball includes the washer and nut for attaching to the bumper or your trailer hitch bar.   Ball Diameter: 2-5/16" Shaft...

2-Tang Clevis with 1" Pin

Our 2.0" Medium Duty 2" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10. Our hitches are extensively tested and exceed SAE-J684 testing requirements.  The...

2.0" Extreme Duty 10" Drop/Rise

2.0" Extreme Duty 12" Drop/Rise

2.0" Extreme Duty 4" & 6" Offset Hitch

2.0" Extreme Duty 4" Drop/Rise

2.0" Extreme Duty 6" Drop/Rise

2.0" Extreme Duty 8" Drop/Rise

2.0" Extreme Duty Receiver Shackle For the times when you must attach a rope, strap, or chain to your truck, it's vital to find the strongest possible point on the vehicle. The Extreme Duty 2" BulletProof Receiver Shackle solves that problem...

2.0" Heavy Duty 10" Drop/Rise

2.0" Heavy Duty 12" Drop/Rise