EZ LOADER Trailer Parts
Champion Trailers carries a selection of OEM EZ Loader trailer parts from EZ Loader axle to the EZ roller. Many of these items must be ordered directly from an EZ Loader distributor like Champion Trailers. If you do not see your EZ Loader trailer parts let Champion Trailers order that trailer part for you.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
C-Hook Equalizer With Bushing #250-031579-10
$51.95The galvanized C-hook spring equalizer used for EZ Loader trailers wtih a dual or triple axle c-hook suspension. Each c-hook equalizer includes the square rubber bushing (CHB01) with a 5/8'' diameter opening for the spring bolt. C Hook Equalizer...$51.95 -
EZ LOADER Grey Ribbed Roller Assembly - 1-1/16" Stainless Steel Washer/Bushing #300-071417
$27.95EZ LOADER Grey Ribbed Roller for EZ Loader Trailers (1-1/16") Each roller includes the 1 1/16" stainless steel washer as well as the 1" bushing. Each EZ LOADER roller is 4-7/8" in diameter and are considered to be non-marking (as per manufacturer)...$27.95 -
$3.78
-
EZ LOADER 14 1/2" Multi Head #250-010431-01
$33.95EZ LOADER 14-1/2" Multi Head (R10431A) The EZ LOADER Multi-Head is an aluminum roller arm that is intended to be used with multiple roll systems. Each multi-head will hold two EZ LOADER wobble rollers and attaches in the center to an aluminum arm...$33.95 -
EZ LOADER Bent 15" Single Arm #250-010762-01
$37.95EZ LOADER Bent 15" Single Arm (R10762A) The EZ LOADER 15" Bent Single Arm is to be used with a single roller on single slide arms. The EZ LOADER bent arm carries a single EZ LOADER wobble roller on one end and accepts hog rings on the pre-drilled...$37.95 -
3/4" ID Bushing For EZ LOADER Roller #250-024968
$3.953/4" ID Bushing For EZ LOADER Roller Dimensions: 3/4" I.D. x 1-5/16" O.D. x 1-1/8" long$3.95 -
EZ LOADER Hog Ring
$2.60EZ LOADER Hog Ring *This hog ring is intended for EZ LOADER trailers, not LOADRITE trailers*$2.60 -
EZ LOADER Grey Ribbed Roller with 3/4" Stainless Steel Washer/Bushing #300-25140
$27.95EZ LOADER Grey Ribbed Roller for EZ LOADER Trailers Each roller includes the 3/4" Stainless Steel Washer/Bushing This roller with washer and insert is used in ALL applications where a HOGRING is used as the keeper on the aluminum arm. ****HOGRINGS...$27.95 -
EZ LOADER Top Bracket For Bunk Boards #250-022387-10
$13.95EZ LOADER Top Bracket For Bunk Boards (Attaches To P#21786g) The EZ LOADER Top Bracket attaches to the EZ Loader Bunk Support Bracket (21786G) Each top bracket will use four 3/8" x 1-1/4" stainless steel lag screws to attach the board to the...$13.95 -
EZ LOADER 30" Channel Top Bunk Board Support Bracket #250-022047-10
$71.95EZ LOADER Channel Top Bunk Board Support Bracket 30" Long The EZ LOADER Top Bunk Support Bracket is hot dipped galvanized for maximum corrosion resistance. The overall length of the EZ LOADER bracket is 30" and is typically used on the rear cross...$71.95 -
EZ Loader Bunk Support Bracket #250-021786-10 and #250-021787-10
$42.95 - $60.95EZ Loader Bunk Support Bracket #250-021786-10 and #250-021787-10 This Channel Upright is supports brackets for both bunk and roll trailers with 3" wide crossmembers When ordering this part number, you will be sent GALVANIZED!!$42.95 - $60.95 -
EZ LOADER Nylon Glide Bearing #250-021769
$4.95EZ LOADER Nylon Glide Bearing #250-021769 This Poly-Glide Bushing is for the Roller Arm Mounting Pivot Plates to pivot on. It creates friction so the roller arm pivot mounting plate assembly will adjust to the contour of the hull and...$4.95