EZ LOADER Top Bracket For Bunk Boards #250-022387-10

EZ LOADER Top Bracket For Bunk Boards (Attaches To P#21786g)

The EZ LOADER Top Bracket attaches to the EZ Loader Bunk Support Bracket (21786G) 

Each top bracket will use four 3/8" x 1-1/4" stainless steel lag screws to attach the board to the bracket.

Manufacture # 250-022-387-10   

Information Direct from EZ LOADER
This Galvanized Bunk Support Mounting Bracket is mounted to the inside to the Upright Bracket from the cross-member.

Nicknamed (Hat or Top Hat).

There is a Cross Bolt that allows it to rotate inside the upright (Do Not Overtighten).

There is 4-Lag Screws that hold the Bunk to the Top Hat.

This Bunk Support Bracket is available in Galvanized Only. 10ga - 3.38x6.05"