- Trailer Brakes
- Trailer Brakes - DEEMAXX
- DEEMAXX 6 Lug Integral Trailer Disc Brakes #DBI-6K-MAXX
DEEMAXX 6 Lug Integral Trailer Disc Brakes #DBI-6K-MAXX
- In Stock
- Calculated at Checkout
DEEMAXX Maxx Coated 12'' Trailer Disc Brake #DBI-6K-MAXX
3 Year DEEMAXX Warranty
Limited Lifetime Brake Pad Warranty
DEEMAXX Disc brakes passed the SAE J2681 brake test and EVERY brake caliper is tested at 2,000PSI. MAXX COATING on Caliper passed Salt Spray Test per ASTM-B-117-09 over 1008 hrs with no RUST!
DEEMAXX's 6 lug integral hub and rotor is a single cast unit with pressed in idler studs. Since each hub and rotor is cast as a single unit this allows for a smoother overall ride. DEEMAXX's unique rotor cross section design actively draws cooling air from the rotor interior (See Image Above). The mounting flange for DEEMAXX 6 lug disc brake systems are mounted to the standard 5 hole brake flange and can fit in 15'' or larger rims. Each DEEMAXX brake caliper has 120 degree bleed design and instructions for bleeding lasered on the back of the caliper. Each kit included everything needed to install the disc brakes on your trailer axle. DEEMAXX kits are available in wheel units, axle sets, and complete brake kits with lines. See Champion Trailers for all your DEEMAXX disc brake trailer parts.
(2) DEEMAXX Intergral Hub Rotors with races, bearings, and seals
(2) DEEMAXX plated adapter plates with mounting bolts
(2)DEEMAXX caliper with ceramic pads
(2) Spindle Lube Dust Caps
(10) Zinc 1/2-20 lug nuts
Axle Rating: 6,000 lbs
Rotor Diamter: 12''
Bearing Size: 1 1/4" x 1-3/4"''
Seal Size: 2.25''
Bolt Pattern: 6 lug on 5.5'' spread
Customers Also Viewed