3500# Eliminator Torsion Axle for 80'' Wide I Beam Frame

$130.00 (Fixed Shipping Cost)
  • 3500# Eliminator Torsion Axle for 80'' Wide I Beam Frame
  • 3500# Eliminator Torsion Axle Arm Angle Diagram
  • 3500# Eliminator Torsion Axle Mounting Flange Diagram
Frequently bought together:


The Eliminator® Torsion Trailer Axle features removable, greaseable spindles which attach with a castle nut and cotter pin into the hot dip galvanized torsion arm. The arm is positioned at a 35 degree angle from the top of the mounting flange in its unloaded state to allow the maximum amount of suspension travel of the torsion arm and spindle. The torsion arm is inserted into the torsion axle tubing which also houses the four rubber torsion axle cords which handle the shock absorption and allow for the suspension travel of the torsion arm and spindle.

The torsion axle itself is made from hot dip galvanized box tube and is bolted directly to the trailer frame and acts as an additional cross member that stiffens the frame, reducing flex of the trailer frame and adding structural support.

Eliminator® Torsion Axles provide independent suspension where each wheel acts independently for a smoother ride. The rubber torsion cord design provides a progressive rate of shock absorption. Small bumps require less torsion resistance as compared to larger bumps which require a stiffer rate of shock absorption. Eliminator® Torsion axles allow independent movement of each wheel, reducing shock transfer and dangerous trailer sway.

Torsion Axle Towing Guidelines

The Eliminator® Torsion replacement spindle also has the Spindle-lube® feature with a grease fitting in the tip of the spindle and reverse lubrication (greasing from back of hub to front) for easy hub and bearing maintenance. The boat trailer axle comes with two special dust caps and rubber plugs which allow access to the grease fitting without removal of the dust cap.

Include standard galvanize idlers hub and built-in forged four hole brake flange with machined surface finish.

Mounting hardware [not included] : (4) 1/2"x 1 1/2" stainless steel bolts with lock nuts (PART # 4498), and heavy duty 1/2" flat washers, preferably square washers to prevent bolts from pulling through I Beam

Flat rate shipping is only available within the continential United States.

PURCHASE THESE ITEMS SEPERATELY for your Eliminator® Torsion Trailer Axle by Tiedown Engineering:

PART # 80043 - 3500# Replacement spindle with grease fitting.
PART # 4498 - 1/2 x 1 1/2" SS bolts with lock nuts
PART # 105 - 1/2 X 2 9/16 X 4 5/16" SS ubolt with lock nuts (for mounting bunk supports).

View AllClose

Warranty Information

TIE DOWN ENGINEERING GENERAL PRODUCT LINE LIMITED WARRANTY Limited Warranty TIE DOWN ENGINEERING Inc (“TIE DOWN") warrants its products to be free from defects in material and workmanship for one year from date of delivery to the original purchaser when properly installed, used and maintained by the purchaser. This warranty does not apply to damage or loss caused by any or all of the following circumstances or conditions: • Damage caused during installation. • Parts, accessories, materials or components used with or replacing any TIE DOWN braking system not obtained from or approved in writing by TIE DOWN. • Misapplication, misuse and failure to follow the directions or observe cautions and warnings on installation, operation, application, inspection or maintenance specified in any TIE DOWN quotation, acknowledgement, sales literature, specification sheet or installation instruction and service manual ("applicable literature"). • Use of product in any other application other than those described in TIE DOWN’s product information materials. If any TIE DOWN products are found upon TIE DOWN's examination to have been defective when supplied, TIE DOWN will either: credit the purchaser's account for the purchase price of the TIE DOWN product; replace the TIE DOWN product; or repair the product. TIE DOWN has sole discretion in choosing which option to provide. For this LIMITED WARRANTY to apply, TIE DOWN must receive notice of the alleged defect within 30 days of either the discovery of the alleged defect or the expiration of the warranty period, whichever is earlier. Any claim not made within this period shall conclusively be deemed waived. If requested by TIE DOWN, purchaser shall return the alleged defective product to TIE DOWN for examination at purchasers expense. TIE DOWN will not pay for expenses incurred in returning a product to TIE DOWN without TIE DOWN's prior written authority. TIE DOWN shall not be liable for any other expenses purchaser incurs to remedy any defect. Purchasers waive subrogation on all claims under any insurance. Limitation of Liability: It is expressly agreed that the liability of TIE DOWN is limited and TIE DOWN does not function as an insurer. THE REMEDIES SET FORTH IN THIS WARRANTY SHALL CONSTITUTE THE EXCLUSIVE REMEDIES AVAILABLE TO THE PURCHASER OR USER AND ARE IN LIEU OF ALL OTHER REMEDIES, EXPRESS OR IMPLIED. THE LIABILITY OF TIE DOWN, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY OR OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE OF THE PARTICULAR PRODUCT MANUFACTURED, SOLD OR SUPPLIED BY TIE DOWN. To Obtain Technical Assistance: To enable TIE DOWN to respond to a request for assistance or evaluation of customer or user operating difficulty, please provide at a minimum the following information by calling 404-344-0000: • Model number, serial number and all other data on the specific component which appears to be involved in the difficulty. • The date and from whom you purchased your TIE DOWN product. • State your difficulty, being sure to mention at least the following: Application, Nature of load involved, and Weight of the load. Field Service : If field service at the request of the purchaser is rendered and the difficulty is found not to be with TIE DOWN's product, the purchaser shall pay the time and expense (at the prevailing rate at the time of service) of seller's field representative(s). Charges for service, labor and other expenses that have been incurred by the purchaser, its customer or agent without prior written authorization of TIE DOWN will not be accepted. TIE DOWN EXTENDS NO WARRANTY, EXPRESS OR IMPLIED, ON PRODUCTS NOT MANUFACTURED BY TIE DOWN OR TO TIE DOWN'S DESIGN SPECIFICATION, INCLUDING BUT NOT LIMITED TO SUCH ITEMS AS NON-TIE DOWN TIRES, BRAKES, ACTUATORS, BEARINGS, HOSE AND TUBING. PURCHASER'S RECOURSE SHALL BE LIMITED TO ANY WARRANTY OF THE RESPECTIVE MANUFACTURERS. THIS WARRANTY EXCLUDES ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY PURPOSE. THIS WARRANTY DOES NOT COVER NOR EXTEND TO INCIDENTAL OR CONSEQUENTIAL DAMAGE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. No representative has authority to make any representation, promise or agreement except as stated in this Limited Warranty. TIE DOWN reserves the right to make design and other changes upon its products without any obligation to install the same on any previously sold or delivered products. DUE TO THE WIDE VARIATION IN USES TO WHICH TIE DOWN PRODUCTS (WHEELS, HUBS, BRAKES, ETC.) ARE SUBJECTED BY USERS, WE ARE UNABLE TO SPECIFY CARRYING CAPACITIES OR SPEEDS FOR A PARTICULAR APPLICATION. THEREFORE, THE MANUFACTURER MUST TEST HIS EQUIPMENT UNDER THE MOST SEVERE CONDITIONS TO DETERMINE THAT TIE DOWN PRODUCTS ARE SUITABLE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THOSE DESCRIBED ABOVE. EFFECTIVE JANUARY 2003 THIS WARRANTY SUPERSEDES ALL PRIOR WARRANTIES, WRITTEN OR IMPLIED
View AllClose

Additional Information

93 1/4''
Measurement [A]:
80 1/4''
Measurement [B]:
69 1/4''
Degree Angle of Arm:
35 Down
Tubing Size:
2 1/2'' x 2 1/2''
Torsion Axle Towing Diagream:
View AllClose