Loading... Please wait...

Champion Trailers

Trusted Source of Trailer Parts and Repair

1-800-229-6690 | Slidell, Louisiana

facebook twitter googleplus pinterest

3500# Eliminator Torsion Axle for 72'' I Beam Frame

  • 3500# Eliminator Torsion Axle for 72'' I Beam Frame
  • 3500# Eliminator Torsion Axle Arm Angle Diagram
  • 3500# Eliminator Torsion Axle Flange Mount Diagram
$130.00 (Fixed shipping cost)

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

The Eliminator® Torsion Trailer Axle features removable, greaseable spindles which attach with a castle nut and cotter pin into the hot dip galvanized torsion arm. The arm is positioned at a 35 degree angle from the top of the mounting flange in its unloaded state to allow the maximum amount of suspension travel of the torsion arm and spindle. The torsion arm is inserted into the torsion axle tubing which also houses the four rubber torsion axle cords which handle the shock absorption and allow for the suspension travel of the torsion arm and spindle.

The torsion axle itself is made from hot dip galvanized box tube and is bolted directly to the trailer frame and acts as an additional cross member that stiffens the frame, reducing flex of the trailer frame and adding structural support.

Eliminator® Torsion Axles provide independent trailer suspension where each wheel acts independently for a smoother ride. The rubber torsion cord design provides a progressive rate of shock absorption. Small bumps require less torsion resistance as compared to larger bumps which require a stiffer rate of shock absorption. Eliminator® Torsion axles allow independent movement of each wheel, reducing shock transfer and dangerous trailer sway.

Torsion Axle Towing Guidelines

The Eliminator® Torsion replacement spindle also has the Spindle-lube® feature with a grease fitting in the tip of the spindle and reverse lubrication (greasing from back of hub to front) for easy hub and bearing maintenance. The boat trailer axle comes with two special dust caps and rubber plugs which allow access to the grease fitting without removal of the dust cap.

Include standard galvanize idlers hub and built-in forged four hole brake flange with machined surface finish.

Mounting hardware [not included] : (4) 1/2"x 1 1/2" stainless steel bolts with lock nuts (PART # 4498), and heavy duty 1/2" flat washers, preferably square washers to prevent bolts from pulling through I Beam

Flat rate shipping is only available within the continential United States.

PURCHASE THESE ITEMS SEPERATELY for your Eliminator® Torsion Trailer Axle by Tiedown Engineering:

PART # 80043 - 3500# Replacement spindle with grease fitting.
PART # 4498 - 1/2 x 1 1/2" SS bolts with lock nuts
PART # 105 - 1/2 X 2 9/16 X 4 5/16" SS ubolt with lock nuts (for mounting bunk supports).

Other Details

Measurement [A]:
Measurement [B]:
61 1/4''
Degree of Arm Angle:
35 Down
Tubing Size:
2 1/2'' x 2 1/2''

Find Similar Products by Category

You Recently Viewed...

RSS Featured Products