Champion Trailers

6 Lug on 5.5” Painted Trailer Hub Assembly for 1-3/4” x 1-1/4” Spindles

Painted Trailer Hub for boat or utility trailer use. This 6 lug painted trailer idler hub fits on a 1-3/4” x 1-1/4” trailer spindle and can be used on axles with 4,800-6,000 pound capacities. Always double check your current trailer hub to match up the proper trailer bearings. 

Each 6 Lug Painted Trailer Hub includes the inner and outer trailer bearings, double lip seal, and dust caps. All trailer hubs have the appropriate trailer race already installed for easier installation of your trailer hub. For added convenience we have included two different double lip seals to ensure that you have everything needed to replace your hub on your trailer spindle just make sure to test out which seal is the proper one.

Take a look at Champion Trailers Hub Packing and Pre-Loading Procedure for proper and safe trailer hub installation.

Trailer Hub Specifications:

Inner Trailer Bearing Number: L25580 (1-3/4” ID)

Outer Trailer Bearing Number: L15123 (1-1/4” ID)

Inner Trailer Race Number: L25520

Outer Trailer Race Number: L15246

Bolt Pattern: 6 lug on 5.5”

Hub Bore ID: 2.44”

Hub Height: 4.5”

Trailer Hub Kit Includes:

1-Painted 6 Lug on 5.5” Idler Hub

1-L25580 Trailer Bearing

1- L15123 Trailer Bearing

1-L25520 Trailer Race

1-L15246 Trailer Race

1-22333TB Double Lip Seal

1-21333TB Double Lip Seal

1-2.44 Plain Metal Dust Cap

1-Black Iron Cotter Pin

1-Tang Washer

6- ½-20” Zinc Lug Nuts