Painted Trailer Hub for boat or utility trailer use. This 5 lug painted trailer idler hub fits on a 1-1/16" short based trailer spindles that are typically found on EZ LOADER trailers with 1,000# pound capacities. This hub is different due to the overall length of the hub which is 3-3/8" which is not an industry standard hub. Is a replacement for the BT150-A and 1409.06 hub manufactured by Reliable and LoadRite. Make sure that this hub is a direct match to existing hubs. Always double check your current trailer hub to match up the proper trailer bearings.
Each 5 Lug Painted Trailer Hub includes the inner and outer trailer bearings, double lip seal, and dust caps. All trailer hubs have the appropriate trailer race already installed for easier installation of your trailer hub. For added convenience we have included two different double lip seals to ensure that you have everything needed to replace your hub on your trailer spindle just make sure to test out which seal is the proper one.
Take a look at Champion Trailers Hub Packing and Pre-Loading Procedure for proper and safe trailer hub installation.
Trailer Hub Specifications:
Inner Trailer Bearing Number: LM 44649 (1-1/16” ID)
Outer Trailer Bearing Number: LM 44649 (1-1/16” ID)
Inner Trailer Race Number: LM 44610
Outer Trailer Race Number: LM 44610
Bolt Pattern: 5 lug on 4.5”
Hub Bore ID: 1.98”
Hub Height: 3-3/8”
Trailer Hub Kit Includes:
1-Painted 5 Lug Idler Hub
2- LM 44649 Trailer Bearings
2-LM 44610 Trailer Race
1-Double Lip Seal
1-1.98 Plain Metal Dust Cap
1-Black Iron Cotter Pin
5- ½-20” Zinc Lug Nuts